Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Enterprise
A chimney sweep in Enterprise typically costs $149 to $269 for a standard cleaning and Level 1 inspection, with most jobs finished in under two hours. If your fireplace has sat unused since last winter, the first thing we usually pull out isn’t a thick layer of creosote, it’s a dense plug of desert dust, dead crickets, and fine silt that has settled into the flue since the last burn. Our team at Hadley Chimney Las Vegas serves Enterprise with background-checked, uniformed technicians who arrive in a tracked window and hand you a written price before any work starts. Call (725) 600-0308 and a live person answers, 24/7, no voicemail loop.
Why Hadley Chimney Las Vegas Is Enterprise’s Preferred Chimney Sweep Company
Hadley Chimney Las Vegas has been cleaning and repairing chimneys since 2003, and a lot of that work happens in Enterprise tract subdivisions built between 2005 and 2018. Homeowners here tend to have zero-clearance metal fireplaces framed into stucco walls, and the crews who show up need to know what that means: understanding how those pre-fabricated flue systems differ from old brick masonry, where the chase cap sits, and what loosened metal joints sound like when the wind blows through.
The reason Enterprise homeowners keep calling us back is straightforward: we show up with a written price, do the work with a camera running, and hand over photos of everything we saw before we leave. That visibility matters when a chimney tech tells you a liner is warped and you cannot see it from the ground. Every repair we do carries the 365-Day Done Right Promise, a written guarantee, and a free second visit if the repair fails. No vague promises, no surprise add-ons at the door.
Response time to Enterprise from our Las Vegas dispatch office is dependable, usually a 20 to 35 minute drive depending on where you are between Dean Martin Drive and the southern edge of the valley. We schedule arrivals in a tracked window, not a four-hour spread, and you will see live arrival tracking just like you would with a rideshare. Cory Mitchell, who leads our team, has spent more than two decades in the chimney trade and oversees every job through this part of the Las Vegas valley.
Styles & brands we work with





Fireplace Cleaning in Enterprise
Fireplace Cleaning in Enterprise nearly always starts with a simple fact: the glass doors, firebox, and flue have been collecting a layer of fine Mojave dust since the last time you had a fire, and that dust is not harmless when mixed with old soot. Here’s what a cleaning actually involves and what it costs when we do it for Enterprise homeowners.
Interior Flue Vacuuming
We run a high-powered HEPA vacuum down the full length of the flue before we do anything else. In Enterprise, skipping this step sends a cloud of fine dust and insect debris straight into the firebox and living room the moment the brush moves. Zero-clearance systems are especially unforgiving because the flue is narrow and the dust has nowhere to go but out. We remove the cap, vacuum the interior, brush the liner, vacuum again, and reassemble the cap with a check for loose rivets and joints.
Glass, Firebox, and Log Set Cleaning
Cosmetic soot buildup on ceramic glass doors is one of the most common complaints in Enterprise, especially on gas log sets that run on a thermostat all winter. We clean the glass with a non-abrasive cleaner, vacuum the firebox, remove and brush the log set, and check that the pilot and burner ports are not clogged with dust. Expect a standard fireplace cleaning in Enterprise to run $149 to $189, while a larger or heavily soiled unit may hit $220 to $250 depending on access and time on the ladder.
Chimney Services in Enterprise
Chimney Services in Enterprise go beyond a basic sweep, and the arid climate here means two problems show up on repeat: warped metal flue components from intense UV and temperature swings, and loose caps that start rattling when the wind picks up. Here is what those services look like and what they cost in Enterprise.
Inspections and Camera Diagnostics
We offer Level 1 and Level 2 inspections, and in Enterprise we recommend a camera pass for almost every zero-clearance system that has seen more than two winters of use. A Level 1 inspection runs alongside a standard sweep and is included in that $149 to $269 service. A Level 2 inspection, which includes full interior video of the flue, runs $199 to $349 in Enterprise depending on the height and number of flues. This is the only way to see what is actually happening inside a framed, sided chimney where the chase hides everything.
Flue and Cap Repairs
When heat or UV has loosened a rain cap or a flue joint, the fix may be a simple re-secure or a replacement with a component from Famco or Copperfield. If the liner itself is cracked or separating, we recommend HeatShield resurfacing or a new DuraFlex liner. We quote a flat price before any repair is scheduled, cover it with the 365-Day Done Right Promise, and include photo documentation of the damaged area and the completed repair. No one in Enterprise should be told a liner is shot without seeing the camera image with their own eyes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Enterprise
We work with the brands that chimney professionals actually rely on, including DuraFlex flexible liner systems, HeatShield ceramic repair compound, and Copperfield chimney accessories. That matters in Enterprise because pre-fabricated zero-clearance systems are built to manufacturer specs, and mixing improvised parts into a metal chase is how you end up with draft problems and carbon monoxide leaks. We keep common replacement parts staged for fast turnaround, and if we diagnose a failed component on a Tuesday, we can usually have the correct brand-name replacement in hand within a few days.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Enterprise Homes
- The Mojave plug: After a long hot summer, fine desert dust and dead crickets pack themselves into the flue. Lighting a fire without clearing that blockage pushes the debris down into the firebox and can force smoke back into the room.
- Dry, flaky creosote breaking loose: In arid Enterprise air, creosote forms in brittle layers rather than sticky tar. A crusty first-degree layer can snap off during a hot burn and lodge at the damper, blocking draft exactly when you need it.
- Rattling rain caps and loose metal joints: Intense UV and day-to-night temperature swings expand and contract metal flue parts. A rattling cap on a windy afternoon near the southern foothills often means a joint has worked loose or a screw has backed out.
- Dust-clogged gas burners: When an unused gas fireplace sits for months in a dusty climate, the burner ports and pilot assembly collect fine grit. The result is a weak, yellow flame or a fireplace that will not light on the first cold evening of the season.
Pricing for Chimney Sweep in Enterprise, NV
We Also Serve Cities Near Enterprise
Our crews regularly travel from Enterprise throughout the southern Las Vegas valley, including Las Vegas, Centennial Hills, Aliante, and Winchester. If you are just outside Enterprise in one of the surrounding neighborhoods, the same tracking, written pricing, and camera documentation applies. Call and a real person will confirm which route serves your street and set a window that works.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Enterprise
How often do I really need a chimney sweep in Enterprise if I only burn a fire a few times each winter?
Once a year is the honest recommendation, even with light use, because the problem in Enterprise is dust and insect accumulation rather than heavy creosote. A system that sits unused from March to November collects silt, dead crickets, and debris that can block draft or push into the firebox when you do light up. If you burn more than twice a week during winter, you may need a mid-season check as well. Call (725) 600-0308 and we will give you a straight answer based on your actual fireplace and usage, not a one-size-fits-all schedule.
Why does my zero-clearance chimney make a rattling noise when the wind blows in Enterprise?
That rattling is almost always a loose rain cap, a backed-out screw, or a metal flue joint that has worked loose from thermal expansion and contraction. Enterprise’s intense sun and wide temperature swings put real stress on pre-fabricated components, and after a few seasons the fasteners give way. We can inspect and re-secure or replace the cap, and if the camera shows separation inside the chase we will quote a flat repair price before any work starts.
I haven’t used my fireplace in two years. What should I check first before lighting a fire in Enterprise?
The first thing to check is whether the flue is obstructed, and the only reliable way to do that is with a visual inspection from the top and a camera pass through the interior. After two idle years in Enterprise, you almost certainly have a plug of dust and insect debris. Do not light a fire to test it. Call (725) 600-0308 and have us clear and inspect the system before the first burn.
Why is creosote so dry and flaky here instead of sticky like in other climates?
The low humidity in Enterprise pulls moisture out of creosote, leaving a brittle, crusty layer that cracks and flakes rather than coating the flue in tar. That flaky buildup does not cling to the liner the way sticky creosote does, so it can break loose and fall, blocking the damper or restricting draft. It is still fuel, and it still burns. Dry creosote is not safer, just different, and it still needs to be removed by a professional before it accumulates.
Do I need a Level 2 chimney inspection for a stucco tract home in Enterprise, or is a Level 1 enough?
For most routine annual maintenance in Enterprise, a Level 1 inspection included with your sweep is enough. A Level 2 camera inspection is the right call if you have not used the fireplace in years, if you hear rattling, if you have had a chimney fire or a water leak, or if you are buying or selling the home. For zero-clearance systems where the flue is hidden inside a chase, we lean toward a Level 2 inspection sooner rather than later because there is no external masonry to show warning signs. Call (725) 600-0308 and we will tell you which inspection actually makes sense for your home, not whichever one costs more.
Written by Cory Mitchell, Owner at Hadley Chimney Las Vegas, serving Enterprise and the surrounding valley.