Famco Flue Liner Replacement Nationwide

Famco Flue Liner Replacement: The Las Vegas Owner’s Guide

We stock and install Famco-compatible flue liner replacements throughout Las Vegas, with typical installed pricing running $1,800 to $3,400 depending on liner diameter, length, and roof access. Most swaps are completed in a single visit, and we carry common Famco size equivalents on the truck so you’re not waiting on a parts order. The way most Las Vegas homeowners discover their liner has failed is straightforward: rust flakes in the firebox, a faint smoky smell even when the damper is open, or a chimney inspection that turns up a crack or separation on camera. Flue liners fail quietly until they don’t, and a compromised liner isn’t something to defer, especially in a valley where gas fireplaces get steady winter use and wood burners run hard through the cooler months.

Call (725) 600-0308

What makes the Famco conversation different from a generic liner job is fitment. Famco has been making galvanized, stainless, and aluminum liner systems for decades, and their sizing follows specific diameter increments. If you have a Famco liner, the right replacement has to match not just the diameter but the connection style. Get that wrong and you’ll have a liner that won’t seat properly, leaks flue gases at the joint, and fails again within a year or two.

Which Famco Models This Applies To

Famco liner systems are generally identified by diameter and material, not a model name stamped on the part. If you have original paperwork, you’ll see references like Famco 5″ x 25′ stainless flexible liner or a similar diameter-by-length designation. If you don’t have paperwork, the diameter is the identifier that matters, and it’s measured from the inside edge of the existing liner, not the outside. That’s one of the most common fitment gotchas we see: someone measures the outside diameter of a failed liner or the inside of the flue tile and orders a size too large or too small.

The second gotcha is connection style and material grade. Famco made liners in 316 stainless, 304 stainless, aluminum, and galvanized, and the choice depends entirely on what’s venting through it. Wood-burning fireplaces require a stainless liner rated for high-temperature combustion gases, typically 316 alloy, because wood smoke is acidic and will eat through aluminum or galvanized within a few seasons. Gas fireplace liners can often run aluminum or 304 stainless, but only if the appliance is rated for it. If a previous owner installed the wrong material, the liner will fail prematurely and look rusted, pitted, or separated at the seams.

When we arrive at a Las Vegas home with a failed Famco liner, the first thing our tech does is confirm the three measurements that control the replacement: inside diameter, total run length, and connection type at the appliance collar. Then we show you the photo. Cory Mitchell’s standing rule on liner jobs is simple: nothing gets recommended until you’ve seen the camera footage of what’s actually wrong.

Signs Your Famco Flue Liner Replacement Is Failing

• Rust flakes or metallic debris in the firebox or around the gas logs. This is the most common early sign in Las Vegas. The liner is corroding from the inside, and flakes are dropping down the flue. With a gas fireplace in Summerlin or Henderson, you’ll often see the flakes collecting on the burner tray or under the logs before you notice anything else.
• A smoke smell when the fireplace is running, even with the damper fully open. That smell means flue gases are escaping through a crack or separation and getting pulled back into the living space instead of exiting cleanly through the cap. Smoke odor indoors is always a liner or draft issue, not something that clears up on its own.
• Visible separation at the seams or horizontal splits in the liner itself. If you can see the liner from the top of the chimney or through the firebox, look for dark horizontal lines or gaps. On a Famco liner that’s been through repeated heating and cooling cycles, the seams are where failures start.
• A flue inspection report that flags thin wall thickness or pitting. This is the one most Las Vegas homeowners don’t see themselves. During a standard sweep or inspection, our camera shows the interior of the liner in real time. Thin walls, pitting, or a hole the size of a dime all show up clearly, and you should get that footage before anyone recommends a replacement.
• Your gas fireplace has started running less efficiently or throwing a stronger exhaust smell at startup. Gas appliances rely on a properly sized, intact flue to vent combustion gases. When the liner starts to fail, the exhaust path narrows or leaks, and the appliance has to work harder. You’ll notice it first as a smell on cold starts and then as reduced flame quality.

Replacement Cost & What’s Included

In Las Vegas, a full Famco-compatible flue liner replacement typically runs $1,800 to $3,400 installed. The range isn’t guesswork; it’s driven by four measurable factors: liner diameter (a 4″ gas liner is less expensive than an 8″ wood liner), run length (a single-story Summerlin ranch has a shorter flue than a two-story home in Green Valley), material grade (316 stainless costs more than aluminum, and wood-burning applications require it), and roof access (a steep-pitch tile roof takes longer and costs more than a low walkable roof).

Here’s the pricing structure we lay out for every Las Vegas customer before anyone touches the roof:

Every quote includes the liner material, the connection hardware, cap remount, and full camera verification after the install so you can see the liner seated correctly top to bottom. Nothing is recommended without the before photo, and nothing is finalized until you’ve approved the written price. And if that liner fails inside 365 days because we didn’t install it right, we’re coming back free, guarantee in writing. That’s the 365-Day Done Right Promise, and it applies to every repair we do in the Las Vegas Valley.

DIY or Call Us?

There’s an honest split here. You can safely check the firebox for rust flakes, run a visual inspection of the liner from the top of the chimney if you have a safe ladder setup, and note any smoke smells in the room. But actual flue liner replacement means climbing onto a Las Vegas roof, often a tile roof with a steep pitch, pulling a failed liner up through the flue, feeding a new one down through the chimney, and making a connection that won’t leak carbon monoxide into the home. That connection is the part that separates a real fix from a false one. A liner that isn’t sealed properly doesn’t just fail the next inspection; it can vent carbon monoxide into the house, and that’s not a danger worth trading for a weekend project. If you’re seeing signs that your Famco liner is failing, call us at (725) 600-0308 and we’ll get you a camera inspection and a written quote before anything else happens.

What’s on the Truck vs. What Gets Ordered

We keep the common Famco-compatible liner sizes on the truck, because Las Vegas runs on gas fireplaces and we see these jobs every week through the winter. That means 4″, 5″, 6″, and 7″ stainless, plus 4″ and 5″ aluminum for gas-only applications. Odd sizes or custom lengths over 35 feet get ordered same-week and installed as soon as the material lands. If you have a wood-burning setup with an unusual flue tile size, that’s sometimes a custom-fabricated liner job, and we’ll tell you that on the first visit, not the third.

We don’t install whatever is cheapest on the truck. The liner systems we work with alongside Famco include DuraFlex flexible liner systems, HeatShield ceramic repair compound, and Gelco components, and we’ll recommend whichever option actually matches your appliance and your existing flue. If a HeatShield resurfacing is a better fit than a full liner pull, we’ll tell you that too, and show you the camera footage that supports it.

FAQs

Get Your Famco Flue Liner Fixed in Las Vegas

If your Famco liner is showing rust, smoke smell, or separation, the next step is a camera inspection, not a guess. Call (725) 600-0308 and our live person, 24/7, will book a tracked arrival window. Our tech shows up in uniform, puts a camera down your flue, texts you the photo, and gives you a written price before anyone touches a tool. That’s the Relay Visibility Guarantee, and it’s how every job runs at Hadley Chimney Las Vegas, whether you’re in Summerlin, Henderson, or a block off the Strip.

As Cory Mitchell puts it: “I’d rather show you the photo and explain it straight than leave you guessing what’s going on up there.” You’ll get that same transparency on every Hadley Chimney Las Vegas job, from the first camera pass to the final digital invoice.

Written by Cory Mitchell, Owner, Hadley Chimney Las Vegas at Hadley Chimney Las Vegas, serving Las Vegas and nearby areas.